1. The high-frequency machine has two sliding positions. The operator only needs to insert the product, push the sliding table to the bottom, and the machine head will automatically descend, heat up, and ascend. The sliding table will exit, completing the entire simple operation process. The staff can use the machine without special training.

2. Adjustment of output force:

By using a unique low loss coaxial oscillator, the strength of the output force can be adjusted at any time according to the size of the mold and the thickness of the rubber material, so that the operation of the high-frequency machine does not interfere with telecommunications, which cannot be compared with other brands. The adjustment of output can also be matched with a time system, which can maximize the output and fuse the product in the shortest time, thereby increasing consumption.

3. Maintenance and installation:

Current limiting maintenance: When the output force is adjusted too much, the high cycle output will be cut off, which can maintain the electronic tube inside the machine from being damaged due to excessive current.

Spark maintenance: During the working process, if the mold experiences a sparking phenomenon, the maintainer will cut off the output, and the mold will automatically rise, separate the products, and prevent the mold from sparking and being damaged.

Tight control: During the working process, the high-frequency output can be stopped at any time while the mold returns to its original position.

4. Constant temperature of heat:

In addition to high-frequency heating, this machine also has a 1000W heating wire and a thermostat for preheating the mold, accelerating the welding time, and eliminating the phenomenon of sparking.

5. Rising interval:

This machine is equipped with two solenoid valves, two levels of pressure adjustment, and one level of initial pressure; Second gear boost pressure.